THE LEADER IN PORSCHE PARTS & ACCESSORIES, NEW & USED
50010 Harvest Rd.
RACINE, OHIO 45771
IFCRacing - Page #7
Lightweight Racing Parts - Page #7
See more pics. of Cyril Pernods IFC Racing Wide Body 1 piece molded front end on our Friends and Associates page #9
PN: 944 LWRD - 924/944/968 Fiberglass Light Weight Racing Doors
Price - $1495.95

Our 924/944/968 Fiberglass Light Weight Racing Doors are now available with our new adjustable door hinge design. This allows for a perfect fit and makes installation possible in just a matter of minutes.  

This combined with our original "Quick Door Removal system allows for these doors to be opened and removed if desired in seconds with no tools required.
These doors are a must for the serious racer.
Avg Weight 12-14 lbs ea

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: 944-ADSS - Kokeln style front fiberglass with aluminum core adjustable lower splitter spoiler
Price - $519.95


Our new Kokeln style front fiberglass with aluminum core adjustable lower splitter spoiler.
 This part is specifically designed to create maximum down force while being as adjustable as possible. It can be used with or without additional frontal supports turn buckles or tensioner wires etc.
This part can be easily adapted to fit many different front spoiler, splitter air dam style applications.

The aluminum encased in the splitter was fabulous and did exactly what we wanted it to do. The front end was absolutely planted. I fricking LOVED it!!!
Thanks much,
Lanny

(See more of Lannys pics on our Friends and Associates page)
PN: 934-F40 - 944 Wide Body fenders
Price - $1795.95

These new front 944 Wide Body fenders have the same fender flare dimensions as our Wide Body Front Fenders and are now offered with our bolt on part number F-40 VRL Racing louvers included. These fenders are also vented out the rear vertically in front of the doors. Similar to Ferrari's legendary F-40.

Please click on the link below for some excellent reading and even better pics.
http://www.speedhunters.com/2013/12/german-speed-metal-a-time-attacking-porsche-944-turbo/#chapter-challenge-accepted

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: 934-WBLF40 - F-40 style 944 front fenders with built in louvers.
Price - $1500.00

These fenders can be ordered to fit the 944 NA front Valance cars and also the Turbo and S model 944 cars.

Pricing is for 1 pr. (fender louvers are shipped unvented)

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: F-40 VRL - F-40 and 944 Wide Body front fender bolt on racing louvers with all mounting hardware and can either be used as a removable bolt on addition or molded on permanently.
Price - $495.95
PN: 93468-FRP - GTP Style Fiberglass Ground Effects
Price - $749.95

are designed with a smooth exterior and also a smooth underside gel coat finish so they can be used if so desired with our flat bottom smooth underside panels once that project is completed.

We can make them to any track clearance you want as long as you supply us with a couple dimensions.  Skirt clearance from track surface you want, and either your top or bottom oem rocker distance to the floor dimension. With either of those two dimensions we can than determine the grd. effects side drop dimension.  Or if no dimensions are supplied we will ship with a 12" side drop so they can be shorten to your desired length.
 
Here is just a few advantages of using this design: 
Easier, quicker front fender adjustments, installation and removal times.
If you were to use our New shorter Wide Body Louvered F-40 front fenders (pictured with our GTP Ground Effects) could be design to be used if you were to make a 1 piece removable or flip front end in the future.
Our GTP Ground Effects would be a mandatory part of the flip or removable front end design. 

Also by installing our Ground Effects to the side your car they would allow for the simplest, quickest with best possible results in lining up all fenders, and quarters and making both sides exactly the same.
PN:93468-FRP - This is our new Hand laid Fiberglass 924/ 924S/ 944/ 951 and 968 coupes roof panel with permanent sunroof impression for added rigidity. This part utilizes a central internal stiffening composite material. These complete roof panels include material beyond the stock mounting points on the windshield pillars an also below the stock welded seam joints on the rear hatch pillars. This part includes all roof panel oem surrounding spot weld areas, rear hatch hinge mounts positions and the drivers electrical wiring hole are all visible and are not drilled out. 
Price - $429.95

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: 935-LWTLP - Light Weight 944 Tail light Panel Filled Flat between the tail lights. This panel goes to the oem under the hatch spot welded seam, including the hatch latching pins area, goes past the quarter panel oem mounting positions. And includes the horizontal shelf area 2 inches just below the tail lights mounting position.  (It does not include the rear bumper shock mounting positions vertical area) 
Price - $679.95
PN: 944-NAFSR - This is our new 944 naturally aspirated front spoiler splitter available now for the 2012 Racing Season. It will fit 944 models 1982 to 1989.

It can be purchased for street use (no incorporated Aluminum plate) on Page 2 and cut to the same specs as our 944 turbo front valance and also painted to the color of your choice.
(Please use the same pricing and painting instructions as the 944 Turbo front splitter requires if you want us to paint it).

Our Race track part comes with a incorporated Aluminum stiffening plate designed for turnbuckle use at the race track.

This Race Spoiler Splitter can also be cut to any clearance specification you wish. If none is specified it will be shipped as seen in the pics above.

* We also offer a pattern cut flat Aluminum sealing, stiffening plate that seals off from the rear underside from the splitter to the lower radiator support, and also a flat pattern Aluminum panel that attaches from the radiator to the front cross member.

We now offer these panels for both 944 NA Front Valance cars and also the 944 Turbo Nose and S2 models.
Price - $429.95
PN: 944-HPH - Our new 944 High Performance Hood uses a Cowl Induction type design in order to reduce under hood operating temps and to also allow for greater
under hood clearance.
Price - $679.95

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: 944-HPHP - A 944 High Performance Hood panel alone, just the upper panel (not including the under structure)
This panel can be purchased for bonding to your oem under structure or applying directly onto your metal hood.
Price - $429.95

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: 944 LWRH - 924/944/951 Lightweight Racing Hood. Avg. Weight 15 to 18  lbs. Freight Only
Price - 589.95

(OEM stock metal hoods weight 41 lbs)

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: IFC7LVP - Fiberglass 7 Louver Panel cooling vents.
Price - $129.95

Overall Size
20" long by 9 " wide. Actual louvers size are 17 1/2" long by 6 1/2" wide.
These louvers will reduce engine compartment temperatures and reduce high pressure frontal aerodynamic lift. They can also be used on fenders
for reducing front rotor temperatures, or for venting air out of anything.

We designed these specifically for the 944 cars, if you place them against the oem hood seams and slide them down to where the front of the fiberglass edge is 12 " from the edge of the hood, they will remove the eng. compartment air clear back to the fire wall
seal. Louvers are sold unvented.

We also offer a complete light weight fiberglass hood with these louvers flush mounted installed and roughed in.
PN: 944-LWRHL - 924/944/951 Lightweight Racing Hood with a pair of our PN:IFC7LVP 7 Louver Ventilation Panels flush mounted and roughed in. (see pics)
Please allow at least 5 days for complete hood with louvers assembly. 

* PN: 968-TS not included, with PN 968-TS included and installed as seen in the pics.
Price: $1250.00

Avg. Weight 16 to 18 lbs.

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: 968 TS - Low Pressure Style Cooling Scoop
Price $389.95

This is a  low pressure style cooling scoop or " hood vent " as I've heard them called. It can be used on the 944 as well as the 968

Actual Part Dimensions
Length: 19 3/4" Width: 9" Depth: 2 1/2"
PN: 944-WBN - 944 Wide Body Nose
Price $499.95

944 Wide Body Nose fits our Wide body Front Fenders and also fits stock 944 Front Fenders

Note: For your actual shipping charges prior to or after placing your order, please email us with a complete shipping address and your shipping charges will be calculated and emailed back to you as quickly as possible.
PN: 944-RUAS - 944 Rear Under Body Air Stabilizer
Price - $1495.00

Now available for both stock and wide body is our 944 Rear Under Body Air Stabilizer.  This shape is designed to act in the same manner as the vertical tail fin on a airplane does. Its used to help stabilize the machine at high rates of speed.  This part with our Adjustable Rear Aluminum Twin Plane or Carbon Fiber Single Plane Rear Spoiler is the most advanced rear air flow control system ever for the 944 series cars.

This first design (as pictured) is for the original 944 quarter paneled cars. The spare tire bulge in the rear must be removed prior to installation.

We are working to make these cars handle at high speeds like they are on rails. Smoother high speed handling makes quicker lap times easier.

Air Stabilizer fins included, and can be purchased separately individually or set for your Ferrari 430 Scuderia also.

"Custom fabrication and machining services available." 
PN: 944 TFSR - This is our new 944 Turbo and S2 front spoiler splitter available for the 2012 Racing Season. It will fit 944 turbo nose cars and the S2 models. 
This Race track part comes with a incorporated Aluminum stiffening plate designed for adjustable turnbuckle use at the race track.

This Race Spoiler Splitter can also be cut to any clearance specification you wish. If none is specified it will be shipped as seen in the pics above.

It can also be purchased without the incorporated turnbuckle Aluminum plate see part number 944-TFSNA Price $269.95.

"Painting is available see part number 944-TFS on page 2 for instructions and pricing."
PN: 951-SSP - This is our new sealing, stiffening panel that seals off from the rear underside from the splitter to the lower radiator support see part number 951-SSP.
We also offer a panel that attaches from the Radiator Support to the Front Cross Member, Part number 934-RCM
Price $189.95
PN: 93468ARS 56 inch - 56" Multi Adjustable Rear Racing Spoiler

This is a IFC Racing exclusive, This 56 inch multi adjustable Rear Racing Spoiler is the first and only rear wing that we designed specifically for the Racing 944 and 968 Porsche cars.  Using only the very best materials and manufacturing procedures available today, This is the winner we came up with.

This is the STRONGEST,  most adjustable Rear Spoiler on the market today. Both adjuster ends are steel, we use large 3/8 inch Steel Adjuster Ends (not the little 1/4 inch cast aluminum eye ends that have failed in the past).  Also our own custom Steel Turnbuckle Clevis allows for both quick and easy fore and aft movement, height and pedestal angle adjustments. Using this design our spoiler can be set up to be adjusted completely by hand instantly without the use of tools if required. Or it can be configured to being adjusted using normal hand tools.
 
The 2 extruded Aluminum air foils are independently adjustable and when combined with our adjustable pedestal design it makes this rear spoiler the most advanced rear stability air adjustment available today.  All mounting, fastening hardware is stainless steel, nuts, bolts and
washers.

We also offer this item in a 56 inch model available on page 2 click here to view
Would you like to have a spare or different style of wing tip ends for your spoiler, we offer 4 different choices for the Wing Tip Ends. One choice is included with your order.

Additional wing tip ends are $119.95 per pair.

                                               WING TIP ENDS 
                                      Description:     PART NUMBER:
                                        Nascar                    1ARS
                                        Radical                   2ARS
                                        Quick                     3ARS
                                        Indy                       4ARS        

This is quit simply the best adjustable rear spoiler for the 944 and 968 there is at this time. You will be impressed.
PN: 93468IMA - Internal Mounting Apparatus
Price $319.95


This internal mounting apparatus can be added to or used with either part number 93468CFRS or 93468ARS applications.  It's recommended use is primarily for track cars where speeds exceed 120 mph.  This part has no effect on the normal operation of your latching and
locking parts of your rear hatch.

It comes complete with all mounting brackets, fasteners, stainless nuts, bolts and washers, instructions with pics included.
PN: 93468UD - IFC Racing Dual Plane Aluminum Spoiler part Number 93468ARS Racing update for 2012 racing season is now available. This update is designed to control any high speed upper wing flexing at speeds over 100 mph.

It can be attached in minutes and comes with all mounting hardware and instructions. Once installed no additional adjustments are required for it to operate in all the upper wing different ranges of position.
Price - $149.95
PN: 93468CFRS - Also available is our 57" Carbon Fiber single rear wing spoiler
Our Single Plane Carbon Fiber Spoiler is over 3 inches taller than our aluminum dual wing rear spoiler. 

Powder coated Gloss Black wing tips ends, pedestals and body mounts $100.00 (Use drop down box and select option #2)
Colors available are: Flat Black
Price - $1299.95
PN: 944 ARC - This new all Aluminum Console is designed specifically for your 944 or 968 Porsche. It can be powder coated both sides your choice of color.   Console comes complete with Reb Performance, Ignition starter plate with Ignition 'Hot" power on light,  A  emergency slap off RED flip cover with a rubber covered starter button. Wiring Harness and installation instructions included.
Price - $289.95
PN: 924968-CCP - 57" Carbon Fiber Rear Spoiler for 911 body type applications.
Comes with Black Powder coated finish on Wing Tip ends, Spoiler pedestals and body mounts.  Variable pedestal mounting widths up to 27" apart.
Pedestal lengths up to 20" in height.

They have the same fender flare dimensions as our Wide Body Front Fenders. These fenders have a recessed area that can be removed and our bolt on louvers can be installed. These fenders are vented out the rear vertically in front of the doors. Similar to Ferrari's legendary F-40.

Pricing is for 1 pr. of fenders and includes part number: F-40 VRL fender louvers pr. (fender louvers are shipped unvented)
Price - $1395.95
 
Please click here to see beautiful pics of Jacks 911 Porsche race car with our new 911 Carbon Fiber Rear Spoiler .
http://www.flickr.com/photos/8845159@N08/sets/72157634024180712/
PN: 944 RRB - 944 Race Rear Bumper with Mounting Brackets as seen on the red & yellow car at the top of the page.  Weight with alum. brackets 3 to 4 lbs
Price $349.95
PN: 951 THPR - Head light deleted Turbo Header Panel as seen on the red & yellow car at the top of the page.  (Does away with existing headlight openings) Avg. Weight 3 lbs.
Price $319.95
PN: 951-THPRV - Racing Head Light Deleted Turbo Header Panel with Intercooler Vents. Can be installed with or without removing your head light assemblies. OEM headlight covers must be removed.
Price $369.95
PN: 944 TDLC - 944 Turbo Driving Light Covers.  Great for Drivers Ed classes and street use. Covers broke or chipped lens
Price $89.95
PN: 951 THPV - Intercooler Vented Turbo Header Panel
Price $319.95
Ivan Svenson, 88 Turbo S, New York, NY
IFC Racing - Part Number: 944 LWRH Lightweight Racing Hood
To All Our Racing Friends, Please Let Me Say "Thank You"  For letting Us Be A Part Of Your Racing Program.
Sincerely Yours,
Mike Warner
Owner: IFC Racing
Price $995.95
Choose Wing Tip Style
Panel Menu
PN: 944-TNR  (Turbo Nose Race)
Price - $419.95
   
This fits all Porsches 944 Turbo's and S model cars. This part can also be used on 83 and up 944 Naturally Aspirated models using any of our 944 turbo racing header panels.      

Bumper Brackets PN: 944-BB are included.